Introduction
The TianQi 4×4 Heavy Protective Armored Vehicle is a protected mobility platform from ZCZZ DEFENSE for patrol, escort, security, personnel transport, and mission-support requirements. Built on a full-time 4-wheel-drive chassis, the vehicle combines troop-carrying capacity, ballistic and mine protection, and configurable mission equipment for demanding operating environments.
Explore related platforms in the Armored Vehicles category.
Product Overview
The TianQi 4×4 Heavy Protective Armored Vehicle is a TianQi-Class armored vehicle platform developed for protected transport and tactical mobility. It provides seating for a driver, co-driver, and 10 soldiers, with a 12,000 kg total combat weight, 2,000 kg effective load, and 600 km driving range.
The platform supports protected personnel movement, border and security mobility, convoy escort, reconnaissance support, and rapid-response missions. Available equipment includes an optional anti-RPG grid structure, optional central tire inflation system, rear-view camera system, low-light night vision driving device, electric winch, communication equipment, and a catalog-supported remote-controlled weapon station configuration.
Key Features
- TianQi-Class 4×4 armored vehicle platform
- Full-time 4-wheel drive
- Seating for 1 driver, 1 co-driver, and 10 soldiers
- 12,000 kg total combat weight
- 2,000 kg effective load
- 115 km/h maximum speed
- 600 km driving range
- Cummins ISDe6.7-330 engine
- Automatic transmission with 6 forward gears and 1 reverse gear
- Front ballistic protection against 12.7 mm ball ammunition at 100 m
- Side and rear ballistic protection against 7.62 mm ball ammunition within 100 m
- Anti-mine seats and catalog-listed resistance to attacks from 8 kg TNT equivalent anti-tank landmines
- Optional anti-RPG grid structure
- Optional central tire inflation system
- Catalog-supported remote-controlled weapon station configuration
Technical Specifications
| Specification | Value |
|---|---|
| Product name | TianQi 4×4 Heavy Protective Armored Vehicle |
| Class/designation | TianQi-Class / TianQi 4×4 |
| Total combat weight | 12,000 kg |
| Effective load | 2,000 kg |
| Kerb weight | 10,000 kg |
| Overall dimensions | 6990 mm x 2496 mm x 2600 mm, without turret |
| Approach / departure angle | 32° / 36° |
| Seating capacity | 1 driver, 1 co-driver, 10 soldiers |
| Drive form | Full-time driven by 4 wheels |
| Seats | Five-point safety belt; anti-mine seat |
| Tyre | 4+1 YK-395/85R20 with inner support |
| Air conditioning | Roof-mounted integral air conditioner; 8KW |
| Rear-view system | 7-inch LCD on dashboard; infrared camera at rear end |
Mobility / Chassis
The TianQi 4×4 platform is configured for protected mobility across road and off-road environments, with specifications for speed, range, gradeability, obstacle clearance, fording, and chassis performance.
Maneuverability
| Specification | Value |
|---|---|
| Maximum speed | 115 km/h |
| Endurance / driving range | 600 km |
| Fording depth | 1100 mm |
| Gradient | 60% |
| Side slope | 35% |
| Vertical obstacle | 400 mm |
| Minimum ground clearance | 400 mm |
Chassis And Powertrain
| Specification | Value |
|---|---|
| Engine | Cummins ISDe6.7-330 |
| Maximum torque | 1200 Nm @ 1400-1700 rpm |
| Power output | 243 kW @ 2500 rpm |
| Transmission | Automatic transmission, 6 forward + 1 reverse |
| Steering | Hydraulic power steering |
| Brake | Pneumatic brake with ABS |
| Suspension | Double wishbone independent suspension; coil spring |
| Electrical system | 24V system; negative grounded; 2 x 180Ah batteries |
Protection
The TianQi 4×4 Heavy Protective Armored Vehicle is listed with ballistic protection, anti-mine seating, and optional survivability equipment for protected mobility missions.
| Specification | Value |
|---|---|
| Front ballistic protection | Can resist 12.7 mm ball ammunition at 100 m |
| Side/rear ballistic protection | Can resist 7.62 mm ball ammunition within 100 m |
| Anti-mine performance | Anti-mine seats; catalog-listed resistance to attacks from 8 kg TNT equivalent anti-tank landmines |
| Anti-RPG protection | Grid structure, optional |
Mission Equipment
| Equipment | Value |
|---|---|
| Electric winch | Electric winch |
| Central tire inflation system | Optional |
| Communication system | VRC-2000A ultra-short wave fixed-frequency system; 50W power amplifier; truck mountable; center-fed antenna; intercom model XCT-1, one unit |
| Observation device | Low-light night vision driving device |
| Night vision equipment | Night vision device identifying a person within 100 m and a vehicle within 150 m in the absence of moonlight and starlight |
Weapon Station / Armament
The TianQi 4×4 is available for review with a catalog-supported remote-controlled weapon station configuration featuring 12.7 mm machine gun and 35 mm grenade launcher capability. Final weapon, sight, and mission-equipment configuration should be confirmed according to procurement requirements.
| Specification | Value |
|---|---|
| Catalog-supported weapon module | 12.7 mm MG and 35 mm grenade remote-controlled weapon station |
| Installation | Gun rack installed on the roof |
| Firing / traverse angle | 360° |
| Pitch angle | 15° to 75° |
| Aiming support | Built-in camera to assist aiming |
| Control | Rotation, pitch, and firing operated through the in-car controller |
| Weapon compatibility | Can carry machine guns and grenade launchers according to needs |
| Recoil management | Axial shock absorber on firearm installation platform |
| Drive | Pitch and rotation driven by dual servo motors, with high safety redundancy and shooting accuracy |
| Optional auxiliary sights | According to customer needs: ordinary visible light, high-magnification visible light, infrared, and laser ranging |
| Construction | Aluminum alloy structural components and sheet metal casing to reduce system weight |
Applications / Mission Roles
- Protected personnel transport
- Border patrol and security mobility
- Convoy escort and mission support
- Reconnaissance support
- Peacekeeping operations
- Rapid-response security missions
- Special-purpose tactical mobility
FAQ
What configurations are available for the TianQi 4×4 Heavy Protective Armored Vehicle?
The TianQi 4×4 can be reviewed with mission-specific equipment such as optional anti-RPG grid structure, optional central tire inflation system, communications equipment, rear-view camera system, night vision driving device, and remote-controlled weapon station configuration.
What protection information is available for procurement review?
Available protection information includes front resistance to 12.7 mm ball ammunition at 100 m, side and rear resistance to 7.62 mm ball ammunition within 100 m, anti-mine seats, catalog-listed resistance to attacks from 8 kg TNT equivalent anti-tank landmines, and optional anti-RPG grid structure.
What mobility specifications are available?
Mobility specifications include a 115 km/h maximum speed, 600 km driving range, 1100 mm fording depth, 60% gradient, 35% side slope, 400 mm vertical obstacle capability, and 400 mm minimum ground clearance.
Is the remote-controlled weapon station standard equipment?
The catalog supports a remote-controlled weapon station configuration with 12.7 mm machine gun and 35 mm grenade launcher capability, but final weapon and sight configuration should be confirmed according to procurement requirements.
Procurement / Request A Quote
For project requirements, configuration review, or quotation support for the TianQi 4×4 Heavy Protective Armored Vehicle, Contact Us with your intended mission role, required protection configuration, seating or payload requirements, communications needs, weapon station requirements if applicable, delivery location, documentation requirements, and procurement timeline.
Request a Quote for TianQi 4×4 Heavy Protective Armored Vehicle configuration support.